Canon Pixma PRO-100 Driver and Software Download - Canon Printer Driver
Skip to content Skip to sidebar Skip to footer

Canon Pixma PRO-100 Driver and Software Download

Canon Pixma PRO-100 Driver and Software Download

Canon Pixma PRO-100
Canon Pixma PRO-100
The Canon PIXMA PRO-100 is capable of producing some very good prints, both in the smaller [4 x 6] photo size and the larger [8.5 x 11] photo size. Overall, the prints are error-free, with sharp details and consistently good color quality. The printer's [4800 x 2400] resolution is perfect for printing photos, although in our review of higher resolution printers, the difference was never noticeable in our test prints.

However, when compared directly to the other print samples in our review, the PIXMA PRO-100 has slightly muffled tones, and one image also has a slight yellow tinge. On closer inspection, there are also faint lines located at the end of some photos. This is only detected at certain angles under high magnification, but when comparing prints with such results, this small difference is important. Print speed is also slow, photos [4 x 6] print at an average speed of [97] seconds each and full-page photos print in an average of [192] seconds. Both times are among the slowest in the test.

Files Download
PRO-100 series XPS Printer Driver Ver.5.87 (Windows 7/7-x64 / 8/8-x64 / 8.1/8.1-x64 / 10/10-x64 / 11)
Windows Printers and Multifunction Printers security patch Ver.1.0.2 (Windows 7/7-x64 / 8/8-x64 / 8.1/8.1-x64 / 10/10-x64 / 11)
PRO-100 series Printer Driver Ver.1.07 (Windows 7/7-x64 / 8/8-x64 / 8.1/8.1-x64 / 10/10-x64 / 11)
PRO-100 series CUPS Printer Driver Ver. (Mac OS 10.10/10.11/10.12/10.13/10.14/10.15/11/12)
Print Studio Pro Ver.2.2.5 (Mac OS 10.10/10.11/10.12/10.13/10.14/10.15/11/12)
Quick Menu Ver.2.8.2a (Mac OS 10.10/10.11/10.12/10.13/10.14/10.15/11/12)
Canon IJ Network Tool Ver.4.7.3 (Mac OS 10.10/10.11/10.12/10.13/10.14/10.15/11/12)
PRO-100 series ICC Profile Ver. 1.0.0 for Art Paper Printing (Mac OS 10.10/10.11/10.12/10.13/10.14/10.15/11/12)
Canon Pixma PRO-100 Driver Installation and Removal Steps
Printers became an important device. This device is important for those that would like access to figure with written documents. The printer is additionally capable of functioning as a duplicator further as a scanner, therefore giving additional options. Of course, folks conjointly would like access to line up a printer. Meanwhile, to setup the printer there's a printer driver that must be put in before victimization the printer. during this case, Canon united of the leading printer brands conjointly provides drivers that has to be put in initial.

If the printer is new, there's a CD as associate installer. it's enough to insert the CD, when that the installation dialog can seem on the laptop screen. After that, the user simply must monitor the method and conjointly the drivers are going to be put in. Another case happens once the user doesn't have associate installation disk. However, Canon has associate installer on their web site. Before accessing the location, the user should initial check the printer sort. After that, it's conjointly necessary to understand pc computing, 32-bit or 64-bit laptop. After that, follow the instructions :
  1. After finding the kind of printer and conjointly the kind of laptop through a probe engine. "Users" will enter the installation driver simply. for instance, "user" enters "Canon Pixma PRO-100 installer driver". After that, the user selects the link from the official Canon web site. this can be necessary to urge a secure installer that's free from viruses or malware.
  2. On "selecting" the link, the "user" are going to be redirected to an internet page containing a link to transfer the installer. "Users" solely got to choose the "download" button.
  3. The "download" method can then begin. once finished, the "user" solely must open the downloaded "file" and so continue the installation method.
Next is that the procedure for uninstalling the Canon printer driver. this can be needed once the user contains a new printer. previous drivers should be removed, as a result of every style of printer needs a selected driver. And here is the way to take away it.
  1. The first step is to open the applying through the applying list. Next, associate icon can seem to uninstall the driving force. "Select", the uninstall method can begin.
  2. Accessing control board via Windows mortal for Windows laptop.
  3. Then the applying information can seem. choose the precise application or drive, and choose "delete". Next, follow the method in line with the directions